TL;DR
- -Landscape lighting and pool lighting are separate systems — in-pool LEDs only illuminate the water; landscape lighting handles paths, trees, retaining walls, and steps.
- -Any hardscape you want lit — steps, retaining walls, deck-adjacent paths — requires conduit and wire runs installed before the concrete is poured.
- -Low-voltage (12V) systems are the standard choice for residential pool landscape lighting: safer near water, easier to route, and transformer-mounted on the equipment pad.
- -A complete landscape lighting package around a custom pool typically costs $4,000 to $12,000, separate from your in-pool lighting budget.
- -Smart controllers from CAST, VOLT, or Kichler let you manage zones by app and can integrate with Pentair, Hayward, and Jandy pool automation platforms.
- -In the Carolinas, your outdoor season runs nine to ten months — a well-planned lighting system makes evening use possible from March through November.
The Gap Nobody Plans For
Most homeowners spend real time choosing the LED lights inside their pool — color-changing, app-controlled, the works. Then the pool fills for the first time, they flip them on after dark, and realize everything outside the water is pitch black. The deck, the trees, the path from the back door — invisible.
Landscape lighting around your pool is a completely separate system from your in-pool fixtures, and it needs to be planned before the first yard of concrete gets poured. Miss that window and you're paying for broken hardscape, exposed conduit patches, and a job that should have cost a fraction of what it ultimately does.
Two Systems, Two Jobs
Your pool's LED fixtures — mounted in the pool wall — do one thing well: illuminate the water. They're spectacular at it. But they don't cast useful light on your deck, your steps, the path to your house, or the trees around the pool. That's landscape lighting's job.
Think of pool lighting as the chandelier. Landscape lighting is everything else that makes the room work at night. Neither does the other's job, and neither replaces the other.
What to Light and Why
A complete landscape lighting plan for a custom pool area usually covers four zones.
Steps and grade changes. Any elevation change — pool entry steps, retaining wall stairs, deck-to-grass transitions — needs illumination. These fixtures get built into risers and treads during construction. Adding them afterward means tearing things apart.
Path lighting. The walk from your back door to the pool should be clearly lit with low-mounted bollards or stake lights spaced 8 to 10 feet apart. When you're walking barefoot after dark, this isn't just ambiance — it's safety.
Tree uplighting. If you have mature oaks, crepe myrtles, or specimen trees near your pool — and in the Carolinas, most properties do — a single fixture buried at the base and aimed upward turns a 40-foot tree into an architectural element. This is the detail that separates a good-looking pool at night from an unforgettable one.
Retaining walls and structures. If your pool project included retaining walls, that stonework deserves its own lighting. Cap-mounted bullet fixtures or linear strips set into the wall face wash the stone with light and anchor the depth of the design after dark.
Why the Timing Matters
This is where the expensive mistake happens. Low-voltage landscape lighting requires direct-burial wire runs that need to go under hardscape before it gets poured. Step lights require conduit built into the riser before the concrete sets. Fixtures near the deck need their wire buried before the stone or pavers go down.
None of this is complicated if it's on the plan from day one. All of it requires a jackhammer if it isn't.
The same logic that applies to your outdoor audio system and outdoor shower applies here: run the conduit during construction, even if you're not installing every fixture right away. A $200 conduit stub-out during the build prevents a $1,500 demo-and-repair job three years later when you decide you want that retaining wall lit after all.
Low-Voltage vs. Line-Voltage
For most residential pool landscape lighting, low-voltage (12V) systems are the right answer. The wire is easier to route, the fixtures are inherently safer near water, and the transformer mounts on your equipment pad or exterior wall — exactly where you want your controls to live.
Line-voltage (120V) fixtures are brighter and appropriate for large tree uplighting or dramatic architectural features, but they require conduit and a licensed electrician for every run. If you're planning any line-voltage work, those runs get roughed in during construction alongside everything else.
Smart Controllers and Zone Management
A quality transformer isn't a simple timer anymore. Controllers from brands like CAST, VOLT, and Kichler let you create independent zones, dial brightness up or down by area, and program seasonal schedules from your phone. If your pool runs on a smart automation platform — Pentair IntelliConnect, Hayward OmniLogic, or similar — many landscape lighting controllers can integrate directly, so your entire outdoor scene triggers with one tap.
This matters more in the Carolinas than it might elsewhere. Your outdoor season runs nine to ten months. Evening use — poolside dinners, spa nights, entertaining on the deck in October — is common in a way it simply isn't in colder climates. A well-planned lighting system means your backyard looks as inviting at 9 p.m. in November as it does on a July afternoon.
What It Costs
A professionally designed and installed landscape lighting package around a custom pool typically runs $4,000 to $12,000, depending on zone count, number of fixtures, whether you're mixing low-voltage and line-voltage, and the total size of your outdoor space. This budget is entirely separate from your in-pool lighting.
That's a real number, but the return on it is high. Few decisions do more for how your property shows after dark — and in the Carolinas, after dark covers a large portion of your outdoor year.
Have This Conversation Early
The right time to plan your pool's landscape lighting is during the design process, not after the crew packs up. Rock Water Pools works with homeowners throughout Lake Norman and the Carolinas to integrate landscape lighting into the build plan from the start — so the conduit runs where it needs to, the transformer lands in the right spot, and you're not paying for a jackhammer job two years from now because you wanted a retaining wall lit.
Call us at 704-450-1023 to schedule a consultation and talk through what your property actually needs.
About the author
Rock Water Pools - Custom Pool Designer & Builder. Mooresville-based custom pool design and build team. Serving Lake Norman, Charlotte metro, and the Carolinas since 2008. Hundreds of completed concrete and fiberglass builds across NC and SC. Questions? Call or text (704) 450-1023.
17+ years building custom inground pools across the Carolinas.
